NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC

Model NO.
34HS15060/86STH150-6004+CF2068M
Type
Magnetic-Electric
Certification
ISO9001
Brand
Thank
Application Field
Servo Control System
The Applied Voltage
220VAC, 110VAC, 48VDC,36VDC,24VDC
Adaptive Drive Model
CF20522m ,CF20611m, CF2068, 860
Adaptive Drive Motor
Stepper Motor Driver
Transport Package
Carton or Wooden Box with Foam Inside
Specification
86mm*86mm*L65-165mm
Trademark
THANK
Origin
China
HS Code
8501310000
Production Capacity
200000 PCS/Year
Reference Price
$ 49.29 - 53.58
Contact Us

Product Description

HYBRID STEPPING MOTOR  34HS  SERIES

General  Specifications :
Step Angle ----------------------------------------------------------------------------------------------------------------1.8° (full step)
Step Angle Accuracy --------------------------------------------------------------------------------------±5%(full step, no load)
Resistance Accuracy --------------------------------------------------------------------------------------------------------------±10%
Inductance Accuracy --------------------------------------------------------------------------------------------------------------±20%
Temperature Rise ----------------------------------------------------------------------80 ºC Max(rated current, 2 phases on)
Ambient Temperature Range ----------------------------------------------------------------------------------------  -20 ºC∽ +50 ºC
Insulation Resistance ---------------------------------------------------------------------------------------  100MΩ Min. 500VDC
Dielectric Strength --------------------------------------------------------------------------------- 500VAC 50Hz 1mA 1 Minute
Insulation Class ------------------------------------------------------------------------------------------------------------------ B class
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC
                      Silver Front Endbell                                              Black Front Endbell                                              Silver Front Endbell


Electrical  Specifications:
Model L
Motor Length
(mm) 		Holding
Torque
(N.cm)
Min. 		Rated
Current
(A) 		Phase
Resistance
(Ω) 		Phase
Inductance
(mH) 		Rotor
Inertia
(g.cm²) 		Lead
Wire 		Detent
Torque
(N.cm)
Max. 		Motor
Weight
(g)
34HS6540 65 240 4 0.65 3.3 0.8 4 10 1.9
34HS7060 70 340 6 0.4 1.7 1.0 4 12 2.1
34HS8060 80 450 6 0.45 3.0 1.23 4 15 2.3
34HS10060 100 728 6 0.50 4.8 2.7 4 20 3.3
34HS11860 118 870 6 0.57 5.5 3.3 4 30 3.7
34HS13060 130 1000 6 0.6 5.8 4.0 4 35 4.0
34HS15060 150 1200 6 0.7 6.8 5.0 4 45 5.5

*Shown in the table is the representative product. It can be customized according to the requirements of users.
 
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC

Shaft :
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC
                                                                                                                      
End:
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC
2-Phase Digital Stepping Motor Driver
CF2068M

Overview:


Key Features:
  • High performance and low price
  • Equipped with 16 scales constant torque moment subdivision, the maximum resolution is 40,000 steps / turn
  • The maximum response frequency is up to 200KPPS
  • When a stepping pulse stops more than 1.5S, the coil current will be automatically reduced to half of the set current
  • Optical isolation signal input / output
  • Drive current 2.0A / phase to 6.0A / phase 8 scales adjustable
  • Single power input, voltage range: AC20~80V orDC24V~110V
  • The phase memory function (Note: When the drive stops for more than 3 seconds, it will automatically memorize the motor phase then re-energizes. When the WF signal goes from low to high, the drive will automatically recover the motor phase.)
Current Setting:
The operating current of the drive is set by the SW1-SW3 terminals, which switch for normal working output current (See the table below).
Operating current Ir(A) 2.0 2.57 3.14 3.71 4.28 4.86 5.43 6.0
SW1 ON OFF ON OFF ON OFF ON OFF
SW2 ON ON OFF OFF ON ON OFF OFF
SW3 ON ON ON ON OFF OFF OFF OFF

Subdivision Settings:
The drive's subdivision is set by SW5-SW8 terminals. It has 16 scales. SW4 is function set. Subdivision reference table(pulse / revolution)
Subdivision 400 800 1600 3200 6400 12800 25600 51200
SW5 ON OFF ON OFF ON OFF ON OFF
SW6 ON ON OFF OFF ON ON OFF OFF
SW7 ON ON ON ON OFF OFF OFF OFF
SW8 ON ON ON ON ON ON ON ON
Subdivision 1000 2000 4000 5000 8000 10000 20000 40000
SW5 ON OFF ON OFF ON OFF ON OFF
SW6 ON ON OFF OFF ON ON OFF OFF
SW7 ON ON ON ON OFF OFF OFF OFF
SW8 OFF OFF OFF OFF OFF OFF OFF OFF
SW4 ON Full Current
OFF Half Current
Drive Wiring and Dimension Diagram:
  1. Input voltage cannot exceed AC 80V or DC110V.
  2. Input control signal level is 5V. When higher than 5V, it needs to connect to a current limiting resistor.
  3. Input pulse signal's falling edge is valid.
  4. The fault indicator Fault light will be on when the drive's temperature exceeds 80ºC and stops working. Until the drive's temperature drops to 50ºC, it needs to re-power to resume work. Please install a radiator to protect excessing heat.
  5. When Fault light for over-current (load short-circuit) fault indicator is on, please check the motor wiring and other short-circuit faults, then Re-power the motor for recovery after cleaning faults.
  6. When Fault light for no-motor fault indicator is on, please check the motor wiring, then re-power for recovery after cleaning faults.
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC


Field 
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC

Packing:
Hard cardboard or wooden box with foam inside.
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC

Shipping:
Normally the delivery time is within 10 days according to customer's choice or ship by the best express company to the destination.
NEMA34 Series 86mm 12n. M High Precision 1.8 Degree 2 Phase Step/Stepping/Stepper Motor and Driver 20-80VAC


Delivery:
1.with over 17 years of manufacturing experience, any type of customizing is available.
2.with perfect service system, we can provide you with first class pre and after sale service.
3.we have enough storage of each type of products, with first class packaging and shipping, make sure  accurate delivery.
4.professional sales consultants give you all answers about our proucts.


Certificate:

FAQ:  
Question1: What is your service time:
Answer: 24 hours online service. Email will be replied within 12 hours.

Question2: What about your products' warranty?
 Answer: 1 year. For sea orders, the warranty is 15 months.

Question3: Do you have any certificate?
Answer: Yes we have. Our factory passed ISO9001 and SGS verified. All motors have been approved by CE.

Question4: Do you offer ODM and OEM Service?
Answer: Yes. ODM products according to customized design and specification as well as OEM products.

Question5: What is the delivery time?
Answer: For samples, 10-30 days according to the differnet produced difficulty. For bulk, normally 20-30 days. For customized order, the delivery can be negotiated.

 

Stepper Motor

DREAMKITCHEN.PT, 2023